SIPs - Genius Idea

Once we got planning permission, one of the first decisions we had to make was - how are we going to build our house? Only a few years ago the choice was simple, wood or brick. Now there is the option of straw bales, durisol bricks, thin joint blocks, ICF blocks, SIPs and many other even more obscure building materials. For our needs, SIPs (structural insulated panels) seemed to be ideal. They are a sandwich of wood chip board and insulation, a little less than six inches thick and produced in enormous sheets. At the factory, they are cut into sections for your house walls and roof, holes are made for windows and doors and the whole lot are wrapped up and sent on the back of a lorry to the site.

here's an offcut 

Once they arrive on site, they're glued and screwed together to make up the entire shell of your new home. From bare slab to complete shell can take as little as a couple of weeks. Whilst the speed is impressive, the most significant feature of SIPs are that you end up with a shell that is consistently and robustly insulated. The few joints that are needed to connect panels are glued and airtight. The result is a home that is easy to heat and easy to keep warm.

in a few years time, SIPs will become a significant force in UK construction

SIPs have been used for decades in Canada and some parts of Europe. Whilst they are relatively new in the UK, the market has been maturing. Early experimental homes have given way to a well established stream of new buildings. The benefit to self-builders is obvious - you can build a top spec, energy efficient house for a sensible cost and at low risk. Developers are beginning to catch on and I'm sure that in a few years time, SIPs will become a significant force in UK construction.

After talking to a number of suppliers, we chose SIPS @ Clays, who have proven to be enthusiastic and experienced. They deliver something like a house a week from their base in Skipton and take pride in the results they achieve. The houses are first drawn up in CAD, then cut and delivered for their construction team to erect. At the moment we're making the final small revisions to the CAD model and in a few weeks they'll begin to cut them up for construction this summer. Between now and then though, we need to prepare the site and lay some foundations.